MERV 6 Pleated Filter Or MERV 8 Filter

Question: With regard to pleated air conditioner filters do you think I can go with a MERV 6 filter or do you think I will be better served going with a MERV 8 filter?

A MERV 8 filter will perform better than a MERV 6 filter but the difference will be minimal. If you are not too concerned about dust a MERV 6 filter will do a good enough job. If you are looking for a big improvement in dust control you may want to try a MERV 11 or 12 pleated filter.

Pleated filters in the MERV 5 to 8 range will stop particles of 3 to 10 microns such as some mold spores, fibers, dust mites, some bacteria and fiberglass among other things.

MERV 9 to 12 filters stop particles of 1 to 3 microns such as smoke, bacteria, spray, fumes, coal dust and auto emissions and many other things.

Related Articles

• Merv Ratings For The BoAir 5 Stage Electrostatic Filter
  Question: What is the MERV Rating of the BoAir 5-Stage electrostatic filter? The BoAir 5-Stage elect
• Merv 5 - How High Can I Go Before Restricting Flow Too Much?
  Question: I have a Water Furnace and currently use a pleated filter with a MERV 5 rating.  how high
• Can I Use a Boair 5 Stage Air Filter With a Geothermal System
  Question: Can I use a Boair 5 stage air filter with a geothermal system?  The unit is 8 1/2 years ol
• How to Determine Furnace Filter Size
  Question: I measured the metal frame of my furnace filter at 19 1/2 x 24 1/2 x 3/4 inches but after
• Can I Remove Filter From Air Handler And Install In Return Grill?
  Question: My central air filter is inside the air handler in the attic. Due to a recent back injury,